Setting Point to Point Link Connection pada Mikrotik

Point-to-point telecommunications generally refers to a connection restricted to two endpoints, usually host computers. Point-to-point is sometimes referred to as P2P, or Pt2Pt, or variations of this. Among other things, P2P also refers to peer-to-peer file sharing networks. Point-to-point is distinct from point-to-multipoint where point-to-multipoint also refers to broadcast or downlink. From Wikipedia, the free encyclopedia

Semua setting menggunakan winbox :D.

Pertama, set sebagai bRidge untuk ethernet dan wlan

[admin@Station-1] > interface bridge pr
Flags: X - disabled, R - running
0 R name="Kr Raya" mtu=1500 arp=enabled mac-address=00:0C:42:29:5C:99
protocol-mode=none priority=0x8000 auto-mac=yes
admin-mac=00:00:00:00:00:00 max-message-age=20s forward-delay=15s
transmit-hold-count=6 ageing-time=5m

Lalu, set mode wireless sebagai bridge dan set wds mode dynamic

[admin@Station-1] > interface wireless print
Flags: X - disabled, R - running
0 R name="wlan1" mtu=1500 mac-address=00:02:6F:4F:D0:40 arp=enabled
interface-type=Atheros AR5212 mode=bridge ssid="Musnet" frequency=2412
band=2.4ghz-b scan-list=default antenna-mode=ant-a wds-mode=dynamic
wds-default-bridge=Kr Raya wds-ignore-ssid=no
default-authentication=yes default-forwarding=yes default-ap-tx-limit=0
default-client-tx-limit=0 hide-ssid=no security-profile=default
compression=no

Maka pada Interface akan jadi seperti ini.

[admin@Station-1] > interface print
Flags: X - disabled, R - running, D - dynamic, S - slave
# NAME TYPE MTU
0 R ether1 ether 1500
1 R wlan1 wlan 1500
2 R Kr Raya bridge 1500
3 R wds1 wds 1500

note: settingan ini juga dibuat pada mikrotik ke dua.